| | |
|
| |
| | |
|
|
EFLU4080 - UMX Beast Micro Electric Aerobatic Plane - BNF - By Eflight
|
|
Out Of Stock
Part Number: EFLU4080
Manufacturer: E-flite
Manufacturer Part No: EFLU4080
|
UMX Beast BNF
Key Features
- Flies with the feeling of a larger scale aerobatic plane
- Completely built and flight ready – just bind to any DSM2 aircraft transmitter with dual rates and expo
- Equipped with a brushless 180 outrunner motor
- Small enough for experienced pilots to fly in the backyard
- Includes 2S Li-Po flight battery and DC Li-Po charger
Overview
Designed by aerobatic world champion Quique Somenzini, the Ultra Micro eXtreme (UMX) Beast® is a thrilling small-scale recreation of one of the most awe inspiring airplanes on the airshow circuit today. And, like the full-scale Beast, it delivers high-powered aerobatic excitement that will put a grin on the face of any intermediate to experienced RC pilot.
At the heart of its phenomenal performance is a brushless motor, propeller and battery combination that delivers a spine-tingling thrust-to-weight ratio. This incredible power output, combined with its well-balanced controls and carbon reinforced wing, allow the UMX™ Beast to achieve a level of precision and performance that has more in common with its giant-scale Hangar 9® twin than any ultra micro you've flown before.
The UMX Beast BNF comes completely assembled with a BL180 brushless outrunner motor and Spektrum AR6400LBL Ultra Micro DSM2 Receiver/BL ESC installed. Built-in long-throw servos on the AR6400LBL drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons. A 2S 7.4V 120mAh 20C Li-Po battery and DC Li-Po charger are also included.
Needed to Complete
A 4+ Channel DSM2 Transmitter (with Dual Rates and Exponential programming recommended
UMX Beast BNF
Specs
| Wingspan:
|
14.7 in (374mm)
|
| Overall Length:
|
15.7 in (400mm)
|
| Wing Area:
|
83.8 sq in (5.40 sq dm)
|
| Flying Weight:
|
2.36 oz (67g)
|
| Motor Size:
|
180BL Brushless Outrunner, 2300Kv (included)
|
| Radio:
|
AR6400LBL 6CH Brushless ESC Receiver (included)
|
| Trim Scheme Colors:
|
Black, Red, Gold
|
| CG (center of gravity):
|
18mm from Leading Edge of Bottom Wing
|
| Prop Size:
|
5 x 2.75 in (127mm x 70mm)
|
| Recommended Battery:
|
2S 7.4V 120mAh Li-Po (included)
|
| Aileron:
|
Yes
|
| Elevator:
|
Yes
|
| Rudder:
|
Yes
|
| Throttle:
|
Yes
|
| Flaps:
|
No
|
| Retracts:
|
No
|
| Approx. Flying Duration:
|
5 minutes
|
| Scale:
|
Ultra Micro
|
| Charger:
|
Celectra 2S 7.4V DC Li-Po Charger (included)
|
| Steering:
|
Yes
|
| Experience Level:
|
Intermediate
|
| Recommended Environment:
|
Indoor/Outdoor
|
| Is Assembly Required:
|
No
|
Needed to Complete
A 4+ Channel DSM2 Transmitter (with Dual Rates and Exponential programming recommended)
Tech Notes
To use the supplied Celectra 2S 7.4V DC Li-Po Charger to charge from an electrical outlet, use EFLC4000 - AC to 12VDC Power Supply.
|
|
|
Visit Our
Forum Partners!
|
|
|