1/6 Scale 2wd FG Bigfoot Monster Truck - 26cc

 

 

MONSTER TRUCK 1:6

Technical description of the 1:6 Monster Truck model:

The chassis parts are mounted on a 4mm angled alloy
plate. All borings on the bottom side are countersunk in
order to prevent the screw heads from bearing out. At the
front axle you have the possibility to adjust toe-in or toe-out
through track rods with right-/ left-handed thread. At the
rear axle king pin angle and toe-in can be adjusted by
adjusting screws with right-/ left-handed thread. 8
oil-pressure shock absorbers are mounted at the lower
double wishbones of front and rear axle which can absorb
also heavier bumps to a great extent and ensure an optimal
wheel grip. All rotating parts are supported by ball bearings.
Rear gearwheels, differential gears as well as all driving
elements are case-hardened. The two-piece body is
manufactured in transparent polycarbonate. The chromed
rims are in one piece for weight reasons. The tires have a
fabric insert in order to prevent a tire extension to a large
degree according to centrifugal force at increasing rpm.

The models are equipped with a powerful 26ccm
combustion engine which runs with ordinary 2-stroke
petrol-oil mixture (available at every petrol station). A tank
filling of 0,7 litres gives you about 45 minutes driving fun.
According to the integrated pull-start system the engine
can be started without any problems.
Item N°. 6007
FG Monster Truck/ 26ccm engine

Item N°. 6007R
FG Monster Truck/ 26ccm engine RTR

Monster Trucks are very popular in the USA. They are used
for races as well as for shows where they drive or jump
over a row of older cars. Make the same experience with
the FG Monster Trucks at scale 1:6.

The effective rear drive gives the model an excellent driving
performance on impassable terrain. The huge wheels
overcome almost every obstacle without any problems.

Of course the Monster Truck is available as RTR version,
too = completely mounted and equipped with a radio control
system. Installed is a FM rotary knob system with a servo
for steering and a servo for throttle and brake.

Length 720mm, Width 510mm,
Height 385mm, Wheelbase 480mm